기본 콘텐츠로 건너뛰기

Henkel’s hotmelt

Henkel’s hotmelt products are ideal for bonding automotive interiors and laminating fabrics, and can be applied in a variety of ways depending on the material of the interior and the fabric.

Feature

  • Hotmelt type adhesives are solid state adhesives mainly composed of thermoplastic resins and elastomers, which are melt-mixed adhesive agents, plasticizers and antioxidants. They are generally used without solvents and have a fast bonding speed and can be used in automobiles.

Application

  • Assembling and adhering of automobile interior parts – Door trim, Head liner, Instrument panel
  • Automotive interior fabric laminating – Sheet Headliner, Door trim
SYNTHETIC RUBBER POLYURETHANE POLYOLEFIN
Product Terokal 1251 Terokal 1257 Terostat 971 Terorehm MC
9622-02		 Terorehm MC
9340		 Macroplast QR 4633 Hysol 3650 Hysol 3651
Chemical Synthetic rubber Synthetic rubber Rubber Reactive polyurethane Reactive polyurethane Reactive polyurethane Polyolefin Polyolefin
Features – Excellent heat resistance
– High adhesion strength
in various materials		 – Excellent heat resistance
– High adhesion strength
in various materials		 – Excellent UV Resistance
– Excellent water resistance		 – Excellent heat resistance
– High softening point over 100℃
– Fast hardening time
(Suitable for Edge wrapping)
– Spray or full coating possible
– High initial adhesion
after solidification		 – Spray or full coating possible
– High initial adhesion
after solidification
– High softening point over 100℃
– High flexibility at
low temperatures		 – Long open time allows
re-bonding after cooling
– Very good flexibility		 – Low viscosity
– Middle level Open time		 – Long open time
– Excellent heat resistance
Application – Textile, Membrane
(PE foam, rigid PVC etc.),
Felt, Coating of metal etc.
(pressure sensitive coating)		 – Textile, Membrane
(PE foam, rigid PVC etc.),
Felt, Coating of metal etc.
(pressure sensitive coating)		 – Good adhesion performance
to Glass, aluminum
– Adhesion and sealing
of insulating glass		 – Bonding of automotive
interior parts
– Fabric lamination		 – Bonding of automotive
interior parts
– Fabric lamination		 – Joint parts requiring strong adhesion
– Various materials Adhesive and
industrial laminating
(wood, fabric, film, foam, etc.)		 – Adhesion and coating of
polypropylene or polyolefin
material which does not
require high temperature		 – Adhesion and coating of
polypropylene or polyolefin
material which does not
require high temperature
Colour Yellow Dark ivory Black Light ivory Light ivory Light ivory Light beige Light beige
Smell – – Odorless Weak Weak Weak Weak Weak
Density, g/㎠ about 0.95 about 1.0 about 1.14 about 1.2 about 1.18 about 1.23~1.23 – about 0.983
Viscosity
mPA.s(cP)		 15,000(at 170℃) 15,000~25,000
(at 170℃)		 High viscosity 30,000±80,000
(at 150℃)		 6,000~15,000
(at 130℃)		 5,000~13,000
(at 180℃)		 25,000~33,000
(at 180℃)		 75,000~125,000
(@180℃, ASTM D3236-88)
Molten state (℃) 150~170 180~210 170~190 110~150 (Maximum
160℃ Short-time
exposure possible)		 110~140 (Maximum
160℃ Short-time
exposure possible)		 110~140 180~200 180~200
Service temperature
range (℃)		 -40~80 -40~100 -40~80 (160℃
1 hour exposure possible)		 -40~120 (130℃
1 hour exposure possible)		 -40~120 (130℃
1 hour exposure possible)		 – Softening point
115~125		 Softening point
151~161
Curing start time – – – 10±5sec 60±15sec 4~8min 60~80sec 80~100sec
 Related URL : http://ift.tt/2tjxuQq

The post Henkel’s hotmelt appeared first on INOCHEM.


Henkel’s hotmelt products are ideal for bonding automotive interiors and laminating fabrics, and can be applied in a variety of ways depending on the material of the interior and the fabric.

Feature

  • Hotmelt type adhesives are solid state adhesives mainly composed of thermoplastic resins and elastomers, which are melt-mixed adhesive agents, plasticizers and antioxidants. They are generally used without solvents and have a fast bonding speed and can be used in automobiles.

Application

  • Assembling and adhering of automobile interior parts – Door trim, Head liner, Instrument panel
  • Automotive interior fabric laminating – Sheet Headliner, Door trim
SYNTHETIC RUBBER POLYURETHANE POLYOLEFIN
Product Terokal 1251 Terokal 1257 Terostat 971 Terorehm MC
9622-02		 Terorehm MC
9340		 Macroplast QR 4633 Hysol 3650 Hysol 3651
Chemical Synthetic rubber Synthetic rubber Rubber Reactive polyurethane Reactive polyurethane Reactive polyurethane Polyolefin Polyolefin
Features – Excellent heat resistance
– High adhesion strength
in various materials		 – Excellent heat resistance
– High adhesion strength
in various materials		 – Excellent UV Resistance
– Excellent water resistance		 – Excellent heat resistance
– High softening point over 100℃
– Fast hardening time
(Suitable for Edge wrapping)
– Spray or full coating possible
– High initial adhesion
after solidification		 – Spray or full coating possible
– High initial adhesion
after solidification
– High softening point over 100℃
– High flexibility at
low temperatures		 – Long open time allows
re-bonding after cooling
– Very good flexibility		 – Low viscosity
– Middle level Open time		 – Long open time
– Excellent heat resistance
Application – Textile, Membrane
(PE foam, rigid PVC etc.),
Felt, Coating of metal etc.
(pressure sensitive coating)		 – Textile, Membrane
(PE foam, rigid PVC etc.),
Felt, Coating of metal etc.
(pressure sensitive coating)		 – Good adhesion performance
to Glass, aluminum
– Adhesion and sealing
of insulating glass		 – Bonding of automotive
interior parts
– Fabric lamination		 – Bonding of automotive
interior parts
– Fabric lamination		 – Joint parts requiring strong adhesion
– Various materials Adhesive and
industrial laminating
(wood, fabric, film, foam, etc.)		 – Adhesion and coating of
polypropylene or polyolefin
material which does not
require high temperature		 – Adhesion and coating of
polypropylene or polyolefin
material which does not
require high temperature
Colour Yellow Dark ivory Black Light ivory Light ivory Light ivory Light beige Light beige
Smell – – Odorless Weak Weak Weak Weak Weak
Density, g/㎠ about 0.95 about 1.0 about 1.14 about 1.2 about 1.18 about 1.23~1.23 – about 0.983
Viscosity
mPA.s(cP)		 15,000(at 170℃) 15,000~25,000
(at 170℃)		 High viscosity 30,000±80,000
(at 150℃)		 6,000~15,000
(at 130℃)		 5,000~13,000
(at 180℃)		 25,000~33,000
(at 180℃)		 75,000~125,000
(@180℃, ASTM D3236-88)
Molten state (℃) 150~170 180~210 170~190 110~150 (Maximum
160℃ Short-time
exposure possible)		 110~140 (Maximum
160℃ Short-time
exposure possible)		 110~140 180~200 180~200
Service temperature
range (℃)		 -40~80 -40~100 -40~80 (160℃
1 hour exposure possible)		 -40~120 (130℃
1 hour exposure possible)		 -40~120 (130℃
1 hour exposure possible)		 – Softening point
115~125		 Softening point
151~161
Curing start time – – – 10±5sec 60±15sec 4~8min 60~80sec 80~100sec
 Related URL : http://ift.tt/2tjxuQq

The post Henkel’s hotmelt appeared first on INOCHEM.



http://ift.tt/eA8V8J

태그

라벨:

댓글

댓글 쓰기

이 블로그의 인기 게시물

Bewegung in der Entwicklungsgeschichte von Webdesign.

Aktuellen Prazix zur Erstellung von Webseiten – Trends im Webdesign – sind immer wieder eine der gefragtesten Objekte der Resümee. Die Vielfalt der gestalterischen Ansätze, die Verfügbarkeit allgemein anerkannter (oder umgekehrt fragwürdiger) Benchmarks und eine ziemlich helle Dynamik geben Analysten immer wieder heisse Denkanstöße. Datenautobahn (umgangssprachlich), vor allem darüber hinaus Russland, entwickelt sich rasch, und ein klares Verständnis der kostenlosen Trends, dieses hohes Maß an Genauigkeit ermöglichen Vorhersagen zu machen (zumindest in der kurz- ferner mittelfristig), möglicherweise einen großen Wettbewerbsvorteil dies – sowohl für die mit den Geschäftsprozessen in der Software beschäftigt Firmen Netzwerke ferner für Betriebe, die erst im Internet entsprechend ihren Kundschaft suchen. Dasjenige Design vonseiten Internetseiten ist ihr grafisches Bild des weiteren Stil. Um Kunden anzuziehen, sollte die Ressource bei weitem nicht nur mit ihrer Anzahl einzigartig dies. Di...
댓글 쓰기
자세한 내용 보기

Indian Railways launches new application to track practice times

Technology is bad as it’s very popular, which is not bad as it’s expressive. When it is used in the proper approaches, it is definitely a very effective way to cultivate creativity in children. Since you can observe, the high price tag of technology can grow to be a concern for schools. Contemporary technology enables us to connect to anybody on the planet if we need. Technology is getting increasingly more predominant, and it is now even developed specifically for kiddies. Tech is among the matters folks are blaming for your changes people have now. Not just that, it’s helped people in remote regions of the entire world through telemedicine. It’s due to technology which the health care field can keep adapting. In reality, technology may occasionally be the catalyst for play and imagination. Mobile Number Monitor Unlimited iPhone Application Evaluation When it is good or bad depends upon the people that make it and I feel that is one of the things that’s ignored. The fascinating thi...
댓글 쓰기
자세한 내용 보기